Fastest 3D printers under $1,000, by claimed top speed

The fastest 3D printers under $1,000 are the Bambu Lab X2D and the FLSUN T1 Max, tied at a claimed top speed of 1,000 mm/s. The X2D launched at $649 and the T1 Max at $549. The table lists all 41 shipping printers that launched at $1,000 or less, fastest claimed top speed first.

Every speed, acceleration and flow figure is the maker’s claim, and all 41 printers publish a top speed. Prices are US launch prices for the base configuration. Two printers that claim 1,200 mm/s are left out: the Sovol Zero ($499) is discontinued, and the FLSUN V2 Max has no recorded launch price.

What is the fastest 3D printer under $1,000?

The Bambu Lab X2D and FLSUN T1 Max tie as the fastest 3D printers under $1,000, each claiming 1,000 mm/s. The X2D is a $649 CoreXY with a 65 °C heated chamber and two nozzles. The T1 Max is a $549 open-frame delta with a round 300 mm bed.

Past the tie, the T1 Max claims higher acceleration and flow: 30,000 mm/s² and 90 mm³/s, against 20,000 mm/s² and 40 mm³/s for the X2D. The X2D builds 256 × 256 × 260 mm on a square bed. The T1 Max builds 297 mm tall on its round bed.

Next come two open-frame CoreXY printers at 700 mm/s: the Sovol SV08 ($549) and the Creality Ender-5 Max ($849). Sixteen printers claim 600 mm/s, and 16 claim 500 mm/s.

At $500 or less, no shipping printer claims more than 600 mm/s. The fastest 3D printers under $500 list covers that budget. The T1 Max has the lowest launch price of any shipping printer that claims 1,000 mm/s or more. Just over the limit, the FLSUN S1 Pro launched at $1,099 and claims 1,200 mm/s as an enclosed delta with a 320 mm round bed.

A claimed top speed is not a print speed, because the hotend can melt only so much plastic per second. On a line 0.45 mm wide and 0.2 mm tall, claimed flow caps the X2D near 445 mm/s and the T1 Max near 1,000 mm/s. The speed claims guide and the volumetric flow guide show how that cap works.

What is the fastest enclosed 3D printer under $1,000?

The Bambu Lab X2D is the fastest enclosed 3D printer under $1,000, at a claimed 1,000 mm/s. It launched at $649 with an actively heated chamber rated for 65 °C, so it also leads the heated-chamber printers. Every other enclosed printer under $1,000 claims 600 mm/s or less.

Ten enclosed printers under $1,000 claim 600 mm/s:

• Heated chamber: the QIDI Q2 ($499), QIDI Plus5 ($749), Creality K2 Pro ($849) and Anycubic Kobra S1 Max ($899).
• No chamber heater: the QIDI Q2C ($399), the Anycubic Kobra S1, Bambu Lab P2S and Creality K2 ($549 each), the Flashforge Adventurer 5M Pro ($599) and the Creality K1 Max ($899).

The Flashforge Creator 5 Pro ($949) also has a heated chamber but claims 300 mm/s. The chamber temperature list sorts every enclosed printer by chamber rating.

What is the fastest large 3D printer under $1,000?

The FLSUN T1 Max is the fastest printer under $1,000 with a bed of 300 mm or more. It claims 1,000 mm/s, launched at $549 and is an open-frame delta with a round 300 mm bed. Among square beds that size, the fastest are the Sovol SV08 ($549) and Creality Ender-5 Max ($849), open CoreXY machines at 700 mm/s.

The largest square that fits on the T1 Max’s round bed measures about 212 mm a side. The SV08 builds 350 × 350 × 345 mm and claims 40,000 mm/s² and 30 mm³/s. The Ender-5 Max builds 400 × 400 × 400 mm and claims 20,000 mm/s², with no published flow figure.

With an enclosure, large printers under $1,000 top out at 600 mm/s: the Creality K1 Max, plus the heated-chamber QIDI Plus5, Creality K2 Pro and Anycubic Kobra S1 Max. The large 3D printers under $1,000 list sorts this price range by build volume, and the fastest large 3D printers list covers every price.