Bambu Lab P1S vs X1-Carbon: spec comparison
Bambu Lab P1S vs X1-Carbon spec comparison: identical build volume and motion claims, different bed temperature, nozzle, sensors, chamber rating and price.
Bambu Lab X1-Carbon
Made by Bambu Lab · Discontinued · Released Aug 2022
Overview
- Status
- Discontinued
- Released
- Aug 2022
- Launch price
- $1,199
- Announced
- May 2022
Build
- Build volume
- 256 × 256 × 256 mm
- Enclosure
- Enclosed (passive)
- Air filtration
- Activated carbon
Temperatures
- Max chamber temp
- 60 °C
- Max hotend temp
- 300 °C
- Max bed temp
- 120 °C
Motion
- Motion system
- CoreXY
- Max speed (claimed)
- 500 mm/s
- Max acceleration (claimed)
- 20,000 mm/s²
- Max volumetric flow (claimed)
- 32 mm³/s
Toolhead
- Extruder
- Direct drive
- Stock nozzle
- 0.4 mm hardened steel
- Nozzles
- 1
- Multi-material
- AMS (optional, 4 spools per unit, up to 4 units)
Features
- Bed leveling
- Automatic
- Features
- Filament runout sensor, Camera, Lidar, Input shaping, Air filtration, Power-loss recovery, AI failure detection
- Firmware
- Bambu Lab firmware (closed source)
- Connectivity
- Wi-Fi, SD card, Cloud
- Laser module
- None offered
Speed, acceleration and flow figures are the manufacturer's claims. A dash means the manufacturer does not publish the value.
Compared with
Sources
Last verified
- Bambu Lab, X1-Carbon technical specifications sheet (PDF) (accessed Sep 29, 2026)
- Bambu Lab, X1 series product page (60 °C chamber, 120 °C hotbed, 32 mm³/s flow, lidar, spaghetti detection, vibration compensation) (accessed Sep 29, 2026)
- Bambu Lab Wiki, Introduction to X1/X1C (CoreXY, Micro Lidar, spaghetti detection) (accessed Sep 29, 2026)
- Bambu Lab Wiki, How to enable LAN Mode on Bambu Lab printers (cloud vs LAN operation) (accessed Sep 29, 2026)
- Bambu Lab via PR Newswire, Bambu Lab Launches X1 Series (2022-05-24), X1-Carbon MSRP $1,199 (accessed Sep 29, 2026)
- Bambu Lab Blog, All KickStarter units are shipped out and pre-order update (2022-08-24) (accessed Sep 29, 2026)
- Bambu Lab Blog, The X1-series is EOL (2026-03-31) (accessed Sep 29, 2026)
- 3DPrintBeginner, Bambu Lab X1 Carbon review (2022-06-10), custom direct drive extruder (accessed Sep 29, 2026)